Become an eneo Partner | Buy eneo Products | Data protection declaration | Imprint
The brand eneo | Products | Support | Contact
Copyright 2013 Videor E. Hartig GmbH
My watchlist
Your watchlist is empty
VZS-4/M1
|
VZS-4/M1
Art.-No.: 70564
Twisted Pair Transmitter Card Composite Input, Composite and TP Output
Overview
Video input
0.7-1.3 Vp-p, asymmetrical input (C)VBS, 75 ohms (via 15-pin D-Sub)
Video outputs
1Vp-p, 124ohms, (symmetrical) 1Vp-p, (C)VBS, 75 ohms (asymmetrical) via 15-pin Sub-D plug
Signal clamping
Clamping sets video signal black level to GND
Bandwidth
10MHz
Operations
Video output amplitude
Range
850 m
Overvoltage protection
Ferrit cores
Signal transmission
video
Operation mode
active
LED indication
Input signal loss indication = yellow LED, Power = green LED
Supply voltage
11 ~ 17 VDC (via 15-pin D-Sub)
Current consumption
125 mA max.
Temperature range (operation)
-5°C ~ +55°C
Model
module
Type of unit
transmitter
Housing
aluminium
Weatherproof
no
Dimensions (HxWxD)
50x17,5x90mm
Weight
100g
Twisted-pair video signal transmitter
Power and signal loss indication
Adjustable signal amplitude: 0.7-1.3Vp-p
Black level clamping
Bandwidth: 10MHz
In/output short cicuit and transient protected
19" rack mountable (with VZSY-4/19")
Modular built housing (usable as slide card)
Preferably unshielded twisted-pair cables should be used for the signal transmission. Are there already existing shielded cables which have to be used, the shield must only be earthed on one end, e.g. on transmitter side. We recommend cables in a twisted 2-pair wire bundle configuration (n2x2x0.8 mm). The best result will be achieved by using cables with a twist of up to 7-times per meter. By using unshielded cables with 0.8 mm wire diam. and standard receiver modules (amplification of +30dB), good results can be expected for a transmission length of approx. 800 meters. Shielded cables, cables with different wire diam., or a connection via patch fields, can considerably reduce the max. possible transmission length.
Optional accessories
VZSY-4/19"
Art.-No.: 70587
19" Card Cage Housing for 34 Twisted Pair Cards with built-in Power Supply
VZSY-4/M-FR
Art.-No.: 70586
Rack Mount Front Panel for Twisted Pair Modules VZSY-4
VZS-4/M-CB1
Art.-No.: 70584
19" Connector Board for two VZS-4 Modules
| Description | Format | Size | Remark | Download |
|---|---|---|---|---|
| Documents | ||||
| Manual | 75.62 KB | Detailed manual for this product |  |
|
| Datasheet | <200 KB | Datasheet including specifications, generated live from our product data base | |
|
| Supplier Datasheet | 76.35 KB | Original product information from the manufacturer | |
|
| Tender Document | RTF | 5.75 KB | Technical data as .rtf document | |
| Declaration of Conformity | 16.8 KB | Declaration of Conformity in German and English | |
|
| HiRes Product Image | ZIP | 173 KB | Product Image in a high resolution for print | |
